Or at least it might be......

Looking to draw up a comparision of estimated horsepower and 1/4 times. Preferably P11's but P10's will do.

Hopefully I'll be able to put up a chart of required HP for a target time. Might be useful for all those out wanting to know how fast their turbo conversion is going to get them going......

So......
Want I want from you guys is 1/4 times, HP (at the wheels preferably) and rim size. More I get the better the charts will be. Oh and no bull, (but my 8000bhp quad-turbo P11 CAN do 3milisecond quarters!!!!!):eek: cos it'll screw up the math.

Well, you know what to do, get posting....

If it's a success, I'll do it with 0-60s later. Then 60-0 with various brake mods.

Well, it's a P10, but....
about 2850lbs (including driver).
143.7 whp 131.4 ft.lbs
15.4@91.x mph with CRAPPY 60ft times (high 2.4s, low 2.5's :( )
(should be a high 14 with a good launch (2.2 or so)
this was at about 1500ft. elevation.
stock wheels with 195-65-14 Potenza RE-92's
dyno was on 16" Konig Monsoon rims and 205-45-16 Nitto 555zrs (should have dynoed on stock wheels, DOH!)

i had close to 200whp from my car...never 1/4 but got a 1:44sec on Streets of Willow