Need someone to help me find some cheap aftermarket parts and accesories for a 1989 Toyota Supra Turbo (MKIII). Parts needed are: Tein SS coilovers front and rear, EDFC from Tein, Full Bomex Body Kit except wing ( the good one...?), Cusco struts front and rear, T04 turbo and different exhaust manifolds for the t04 setup, and decent boost controllers!! Thanks Hope to hear from someone soon !!!!!!

Thanks hope to hear from u again !

It's ok to look for deals but don't expect anything for the MKIII to be cheap other than the car. If you want "cheap" go buy a honda, if you want those parts for the MKIII get ready to pay big bucks. TEINs are well over $1K new and just under used. Real bomex is over $200 per peice (side, back, front), T04 manifolds are $500ish. Again I'm not trying to discourage you, just don't expect to get all of those parts for cheap.

It's ok to look for deals but don't expect anything for the MKIII to be cheap other than the car. If you want "cheap" go buy a honda, if you want those parts for the MKIII get ready to pay big bucks. TEINs are well over $1K new and just under used. Real bomex is over $200 per peice (side, back, front), T04 manifolds are $500ish. Again I'm not trying to discourage you, just don't expect to get all of those parts for cheap.




Hey I know your not trying to discourage me its just im cheaking to see what and how I can get parts with least hastle on time as well as my wallet. Just very enthusiastic about moving forward, I mean more forward with the MKIII project car I started last year. You'll never believe it but I somehow stumbled onto this mkIII last year that a few women living together inherated and it turned out to be a mint condition 1989 Mk3 Turbo with 2023 miles on it. Yes, 2023 Miles on the odometer. I was or felt god given when I bought this car for $2000 from these ladies who in my luck did not know the true value of the car and were eager to get rid of it. So since then, feeling so excited, I have removed everything in the engine bay and repainted it gloss black. Then I have tore the entire engine apart and have built it from the bottomn up with new bearings and rings ( kind of un-necessary ) and rebult it. Port and polished heads deakings, CNCed the throttle body to ALOT larger, Port matched whole intake and perfected tollerances when reassembled, pills and all.
So with all the knowledge I have learned about these awsome cars after 5 years and owning 4 of them, I want to go big and get a project finished on the pristeen condition one. Thus im gonna need alittle help from others who know sites and hookups more when it comes to the buying and aquiring aspect in my build. So if at all possible ill need help finding some of the previously listed things for this perfect project car. Thanks for the reply though !!!!!! Hope to hear from u all soon again or to maybe even learn something I have yet to learn about these amazing cars~!!! Thanks

Look on supraforums.com also.

Sounds awesome man, congradulations on the find. :bigthumb: Sorry I don't have any of those parts for sale but I could find them pretty easily. For the TEIN FLEX or SS I would just buy them new from ebay, it's arond $1200 but it might be a better option than spending $800 on a used set with who knows how many miles. Also I would stay as far away from bomex as possable right now, unless you find someone who has the kit IN-HAND and ready to give to you. Bomex has been shafting everyone lately and are back ordered as far as the eye can see. A used kit would probably be a better option if you need it anytime soon. Good luck with the project.

Sounds awesome man, congradulations on the find. :bigthumb: Sorry I don't have any of those parts for sale but I could find them pretty easily. For the TEIN FLEX or SS I would just buy them new from ebay, it's arond $1200 but it might be a better option than spending $800 on a used set with who knows how many miles. Also I would stay as far away from bomex as possable right now, unless you find someone who has the kit IN-HAND and ready to give to you. Bomex has been shafting everyone lately and are back ordered as far as the eye can see. A used kit would probably be a better option if you need it anytime soon. Good luck with the project.


-Thanks for the info, would like to know more about the Bomex issue and what has been going on with that. Someone mentioned such issue. Would like to know more but thanks!