Our Community is 940,000 Strong. Join Us.


EEC computer location, 98, E350, V10


danford1
01-04-2005, 05:44 AM
I have a 98 E350 with a V10 engine. I want to find my EEC computer.
Can anyone pin point its location for me?
I tried the search feature but came up empty.

Thanks.
Danford1

ModMech
01-07-2005, 01:18 AM
From the outside, it is just to the passenger side of the master cylinder. From the inside, above the accelerator pedal.

Why? They do not fail (well ok, but it is EXTREMELY rare).

danford1
01-07-2005, 06:40 AM
Mine hasen't failed yet. I want to get a custom SCT chip burned by Lonnie for it. First I have to get to it to get the code off it. If it is a nightmare to remove, I'd like to know ahead of time.
Thanks.
Danford1
From the outside, it is just to the passenger side of the master cylinder. From the inside, above the accelerator pedal.

Why? They do not fail (well ok, but it is EXTREMELY rare).

ModMech
01-07-2005, 01:36 PM
Oh, VERY good choice. Mr. Dahl knows his stuff, and there is non better than SCT. The catchcode is also on the driver's door post at the front edge near one of the hinges, if you need it. You cannot see the code on the EEC until it is removed.

danford1
01-07-2005, 02:03 PM
Lonnie told me to look for a sticker also. I looked everywhere. No stickers to be found.
Is the computer hard to remove from a 98 van?

Danford1

ModMech
01-08-2005, 12:45 AM
No.

Add your comment to this topic!