Drive axle Hub Nut size
nymorey
12-29-2004, 06:15 PM
Anyone know what size the drive axle hub nut is? I need to replace the bearing assy and would like to get the right size axle nut socket.
94 Lumina Z34
3.4 L DOHC
94 Lumina Z34
3.4 L DOHC
dwalmop
12-29-2004, 11:30 PM
38mm I believe
Manny_boy
12-30-2004, 07:14 AM
36mm (did both my fronts not too long ago...)
nymorey
12-30-2004, 03:27 PM
thanks .
projects for this weekend
Timing belt replacement
Power steering return line replacement (of course it's behind the motor)
Front wheel hub assy
Replace crankshaft oil seal
All tips welcome
It never ends!
Happy New Year!
projects for this weekend
Timing belt replacement
Power steering return line replacement (of course it's behind the motor)
Front wheel hub assy
Replace crankshaft oil seal
All tips welcome
It never ends!
Happy New Year!
dwalmop
12-30-2004, 04:17 PM
oops sorry I always get that mixed up
logankelly
12-30-2004, 05:20 PM
Put transmission in neutral then take off front motor mounts and you can rotate engine forward to allow room in back to work
nymorey
12-30-2004, 07:52 PM
Put transmission in neutral then take off front motor mounts and you can rotate engine forward to allow room in back to work
There are 3 mounts right? 1 upper, 2 at the timing chain end and one at the transaxle end. So which ones do I remove (I know about the upper one) and which ones do I loosen?
There are 3 mounts right? 1 upper, 2 at the timing chain end and one at the transaxle end. So which ones do I remove (I know about the upper one) and which ones do I loosen?
Manny_boy
01-01-2005, 12:42 PM
You have a 3.4. Don't bother removing your mounts in the fleeting hope that you engine will tip forward. It won't. :disappoin Only the 3.1's were afforded that luxury.
nymorey
01-01-2005, 05:16 PM
I think I have finally figured that out.
Thanks
Thanks
Automotive Network, Inc., Copyright ©2024