OK heres the deal...
i have a '96 with 2.2l....
it has three o2 sensors!
i know what o2 sensor look like ....
theres one in the manifold ..one in the cat...and one just behind the cat...
i havent traced them to see where they go yet..it raining out and i dont have a grage....
but i cant find any thing in my manuels that suggest how many im suposed to have and where they need to be....
if some one could tell me?..
thank you....
im trying to knock it down to one sensor in the manifold...
thanks again

its supposed to have 2. ive never seen more than 2. obd2 has 2 sensors & obd1 has 1

You have 3 O2 sensors because the one in the exhaust manifold monitors the exhaust, the sensors
before and after the cat. conv. monitor the effiency (I don't think I spelled that right) of the Cat. Have the car scanned, it will give a fail code of which sensor set the code. In your case, sensor 1 bank 1 would be nearest the engine,sensor 2 would be before the Cat., 3 after the Cat. Keep in mind that a code gives you the problem the system is in,not just the part to replace.

hmm... somthing is fishy here... I've always known them to have 2...

yeah,both of my cavi's have 2.1 in the manifold and 1 behind the cat

I have 2 myself..exhaust manifold, after cat ( 99) my girl's 96 has (2)...same place as mine... wow i love ppl who don't know what they are talking about.

OK thank you all....
my father has a GM interface so I'll check that...
I just might build a O2 simulator and get rid of these
......
happy newyear

Classic-I was answering a generic question on OBD 2 cars. For all I know,it may be a Cal. spec car. I also noticed that there was no help with the the problem,just cracking on how many O2 sensors this car has.Excuse me for posting a little advice.

Go ahead and post away... nothing against you. Just a few of us are regular enough to read through and edit the wrong info... Post on!