Our Community is 940,000 Strong. Join Us.


flex plate?


chevyluver
12-18-2004, 12:09 PM
hey guys
im swithing my powerglide over to a turbo 350 and i was just wondering if i need a new flex plate. i know that i need a different torque converter, i was also wondering if you guys new if the jegs torque converters were any good or if i should get a B&M. thanks

Fyter87
12-18-2004, 12:52 PM
As for a flex plate I have no clue about, but for torque converter I would just go with the B&M HoleShot 2400, what engine do you have? You can also check out their Tork Master Series, their alittle bit less expensive and are good for just driving around, but if you drag your car I would prefer just going with their regular holeshot series.

chevyluver
12-18-2004, 09:14 PM
the engine i have in my car is a 327, thanks for the advice on the torque converter.

Fyter87
12-19-2004, 02:51 AM
NP, Cool, yea if your not going to do any hardcore draging or racing, I would personally go with the Tork Master Series, but do some research and look into more for yourself and decided what you think is the best application. Cool man, Peace!

Add your comment to this topic!