jeep wont start

having problems with spark and fuel! I thought the fuel pump was the problem but it does't have spark either. was told it might be Asd but can't get it to disarm. olso the fuel gauge is the only thing that doesn't work. could be maybe ecm? please help???

replace the CrankShaft Position Sensor.

you will also notice when trying to start that the CHECK ENGINE light doesn't come on - this is a sign of the CPS going bad.

having problems with spark and fuel! I thought the fuel pump was the problem but it does't have spark either. was told it might be Asd but can't get it to disarm. olso the fuel gauge is the only thing that doesn't work. could be maybe ecm? please help???


Need year make model and engine. dale :2cents:

It's a 1999 Jeep Grand Cherokee Laredo, 4.0l 6cyl. :)
Jenni

It's a 1999 Jeep Grand Cherokee Laredo, 4.0l 6cyl. :)
Jenni

Like ask on other post does the check light come on when you turn key on? When you say you can't get it to disarm. Do you mean the alarm system. dale jeepman600@aol.com :2cents:

It's the CPS. Just had one in the shop the other week with the same symptoms. Swapped it out and all was fine.

I'd have to say ECM. Mine's being replaced as we speak. They thought it was the crank shaft position sensor, but it ended up not being that. I have a 2001 Grand Cherokee. Just all of a sudden wouldn't start when I came out of the gas station the other day.

where is the crankshaft position sensor located on a 93 jgc?

what engine?

4.0L - it is on the driverside of the transmission bellhousing.

5.2L - it is on the Passengerside of the engine block, behind the right exhaust manifold. - Easier to get to is you remove the exhaust heat shield and exhaust manifold on the passengerside.