I'm replacing rear brakes on a 98 acccord. it has abs. The rear pistons won't push in so I can't get the caliper back on.
I've tries a "c" clamp but they won't move.
What am i doing wrong.
Please advise asap so I can get the car back on the road.
Thanks,
Niblick

You have to twist the piston in. There is a special tool available, might be able to rent it from the parts store. I find it faster most of the time to use a small pry bar wedged in the slot of the piston.

Thanks for replying. I figured it out after looking at it for a while.