Auto hubs: 40260-9Z500
Manual hubs: 40250-8B400

Manual hubs are $85/each at nissanparts.cc

Brent

That is the million dollar question? And do they work for all three years?

They will work for all 3 years from what I gather, they're at least specified for '01 and '02 models in the system.

As for who makes 'em, ya got me.

Brent

I heard Warn, but they use a quarter turn dial like SuperWinch hubs.

I think the auto hub is mile marker. Not sure about the manual hub. Autozones website has them listed as milemarker but I don't know if that's a hub that will work with th X, or is the OE for the X...

FYI, they are Warns, saw an article about how Warn was recognized by Nissan as a top-notch supplier etc...

Brent

Weren't they "cheaper" versions of the aftermarket Warn hubs people buy?

Don't know how they stack up to the Warn retail products, all I know is that Warn makes both the manual and auto hubs used on the X and Frontier.

Brent

Originally posted by OffroadX
Auto hubs: 40260-9Z500
Manual hubs: 40250-8B400

Manual hubs are $85/each at nissanparts.cc

Brent

...Heh, heh...I know you're going to flame me for bringing this old post back up, but those auto hub part numbers are exactly what I wanted! :p

Checking my front pads yesterday, I noticed my front hubs [aluminum] are disintegrating already...(white corrosion; galvanic action of wet salt between two dissimilar metals)...

I had a pair of alum front hubs on my Bronco II corrode right away from this form of corrosion...

More parts to order and stockpile... :D

FYI, you will also need the following thrust washer to use the factory manual hubs: Part #40218-8B410

Brent