Would someone who has the apexi safc (and had it on a dyno) be willing to share their fuel curve settings? I just installed it and will not be able to dyno my car for a couple of weeks and i dont really want to wait till then.
Thanks

i have it when i get home [at school], i'll look at it

thanks man. any help will be great.

let me warn you, ever car is different. his settings will not work with yours.

I realize this. Odds are that there is no way it could make it run worse than it is now. i just want a starting point to playing with so my car wont run like shit till i have a chance to put it on a dyno........Right not it sputters and shit in high rpms.

what injectors and maf are you running? if your running a a Z32 MAF on 370cc injectors, chances are it will be -16 to -19 on the low throttle settings. if your running 370cc's on a stock MAF then -28 to -27 will work.

on high throttle i wouldn't even bother. mine was -35 to -37 across the board, when my friend's was - 15 to -17. and with the Z maf i'm at -30 and my friend is at some other number. its very very different.

Thanks for the help. This will atleast give me a good starting point. I have the z32 maf and 370 injectors, which is the reason i bought the safc.
Thanks again

Lo -18
Hi -31

i want to ask you guys what does your Afl read when you're driving lik the % and what does it read at 100% throttle

i just want to see what yours read becuase me and my friends read off