Supercharging a type R
|
|
Supercharging a type R integra794 10-18-2004, 06:22 AM
Im about to buy the vortech supercharger for my Type R engine. But what i need to know is there a better alternative? I am looking for 1/4 times. It would be running at a 12psi high boost pulley. What would i get more out of my engine a turbo or a supercharger? Thanks. superbluecivicsi 10-19-2004, 04:58 AM What you need for the type R on boost is a good fuel management. ESPECIALLY@12psi...............it should be a required and neccessary component for boosting your type R. May I be the first to warn you. integra794 10-20-2004, 03:43 AM The vortech comes with a proper kit that includes evrything needed including the fuel system. Is it possible to modify my internals for safety becuase i will be running at 12 psi? eckoman_pdx 10-21-2004, 06:26 AM 12psi on a type-r on street gas will require lower compression normally, which then negates it from being a type-r...the reason it's a type-r IS the very internals you wish to modify. pikkagtr 10-25-2004, 04:52 AM yep so run it around 6-9 psi and you wont have to beef up the insides too much maybe a thicker head gasket personally i like my R N/A civickiller 10-25-2004, 07:25 AM get a good ems like hondata, find a really good tuner and keep tuning and turning up the boost till it starts to detonate adn then back it off alittle. best way ot reach your max. but i also wouldnt exceed 300whp on stock internals Related Links Enter the largest automotive community on the planet! |