Just bought a 1994 jgc limited 5.2 v8 that needs a lot of work but I only paid $2000 for it so I'm happy for now. I have a whole laundry list of thing to fix but chose to start on the cliamte control selector knob first since winter is on the way. The problem is no matter which setting the selector is set to it always blows from the face vents. It will change temperature from cool to warm; guess I need to mention that the A/C is not working either. I put the cliamte control in diagnostic mode and it kicked out a fault code 21 "Door travel range too small" Based on the fact that it does change from cool to warm I'm thinking that its not the blend door. Any help/suggestions will be appreciated.

well if u search on this forum. prolly on page #2 or page #3, someone else had the same problem. I am sure they fixed the problem and the answer is one there.

Thanks for the input but I have searched this forum as well as others and have yet to find the solution for the exact reported problem.

ok well I will search for it, someone else had the same problem, and I know it is on this forum somewhere.

I agree. There is a thread about the same issue but I've read it through and it was only a partial fix.

I had this problem on my '95 when it was new. The linkage to the mode door kept breaking. After a few replacements (a fairly major, take the dash apart job) they replaced it with a redesigned linkage that has been fine ever since.

Thank you. Now I have something to focus on. I'll post an update when finished.

BTW, my 95 manual says that error 21 "Door travel range too low" is definitely the mode door. Blend door would be 23.