|
|
Defective Wiper motor 1999 Yukon Denalih20crft 10-12-2004, 03:05 PM Does anyone know how to get a defetive wiper motor fixed under recall or service bulletin for a 1999 GMC Denali? There is a HUGE recall covering Chevy trucks and SUV's for the same exact problem going back to the early 1990's. Basically, the wiper's work intermittently and often stop in the middle of the window. The dealer has been completely useless and won't look past the Vin number not being on the recall list. Any help would be greatly appreciated. bpnsd 10-13-2004, 04:45 PM FYI, if your dealer looks past the VIN and completes the repair at no charge to you GM will not reimburse the dealer for the repair. Sirfishalot 10-14-2004, 12:34 AM Anyone have info on a recall for this problem on a 92 Yukon? Thanks TheArkMan 10-14-2004, 01:37 PM My wipers do this, yet, they are going (at full speed) stop suddenly and start again.. is there a recall on this? lodownlv 10-25-2004, 01:41 AM it is a cold solder joint on the wiper controle board 010175 11-09-2004, 01:14 AM Just found the post and copied them for your reading. You might try it. Post one Just take the time to resolder it better, it seems the factory cold soldered them and thus they develop hairline cracks, The board is not damaged just needs a better solder. Post two Thanks for your advice, last night I removed the wiper delay board and repaired it. I re-soldered 4 or 5 of the connection spots and cleaned off the contactor tips that touch the rotating gear inside the box. It all works fine now! Dave vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|