no signals or hazard lights working, fuses are good, any ideas?

try replacing the flasher unit. If all signal and hazard lights are not working, this is the most likely culprit

try replacing the flasher unit. If all signal and hazard lights are not working, this is the most likely culprit
do you have any idea were this is located, I have looked everywhere and can't locate it. I did purchase the flasher unit, but no one can find it. thanks alot, this has saved alot of time

The flasher relay for your Tacoma is located on junction block #1, behind dash, left of steering column. Fuses for the hazards and turn signals are also located on junction block #1.

The flasher relay for your Tacoma is located on junction block #1, behind dash, left of steering column. Fuses for the hazards and turn signals are also located on junction block #1.
thanks for all your help, but it is not the flasher, I did change it but nothing. Can it possibly be the relay?
thanks again