Just finished replacing broken "clips" on the passenger side power window. After paying $40 a piece for two pieces of plastic (or nylon?), I finally got the pieces in place and window working.

My problem is that the window is out of adjustment. It closes all the way in the front (near mirror), but leaves a 1/4" gap at the top of the window in the back (near latch). Any way to adjust the "leveling" of the window?

the tape in the window regulator may have come off its track, causing the front to raise higher than the rear. The only fix i know of is replacing the regulator.

Richtazz;

Not sure what you mean by "tape". Are you referring to the cable that raises and lowers the window?