I am having problems removing the water pump on my 97 GT. I get to the last bolt and the pulley on the p/s is blocking this. Do I need to remove the p/s unit and set aside. I saw the thread about the hole in the pulley, but is that to remove the p/s unit since it will not work on the water pump bolt. It lines up on the outside edge of the pulley.

the access holes are for removing the p/s pump; one bolt up top and one on the bottom. did mine two days ago in my 97 gt.

the access holes are for removing the p/s pump; one bolt up top and one on the bottom. did mine two days ago in my 97 gt.

Thanks I got everything back togetherand so far no leaks.