Hi,

I have a problem with my electronic 4x4.

There is no power to the switch. Sometimes it comes on and the 4 wheel drives works great.

Can someone with a shop manual scan the 4x4 wiring diagram ( from the switch to the actuator) and either send it to me or post it somewhere?

I would appreciate that.

Thanks

Lauren d'Entremont

Nova Scotia, Canada

Go to your local Canadian Tire and buy the Haynes manual for the truck for CDN$20 and save the hassle of asking this from now on.

It only 20 bucks and you will use it over and over again.

Hi,

I have a problem with my electronic 4x4.

There is no power to the switch. Sometimes it comes on and the 4 wheel drives works great.

Can someone with a shop manual scan the 4x4 wiring diagram ( from the switch to the actuator) and either send it to me or post it somewhere?

I would appreciate that.

Thanks

Lauren d'Entremont

Nova Scotia, Canada

Hey my lights on the dash work and I can hear the switch on the passenger side engage but the 4 wheel drive is not working, It worked last spring but I hit a deer in May of this year. Right after I got the truck back the selector switch for the defrost floor and cabin area quit working it only blows through the center vents. I seen somewhere in the posts that there is also a vacuum servo that runs the 4x4. Could I have a vacuum issue or is there something else that I should be looking for?

Thanks for any help.

Edward G

on my 98 S-10 the vacuum servo is right under the battery tray mine had a ripped diaphram,Haynes diagrams are nice but they are certainly nowhere complete.My book only goes uo to 99 or else I'd try to help you.I think there is also a transfer case module involved