Help..Trying to replace headlights in a 2000 Grand Ch. Laredo

I can get the pin out without any issues whatsoever but I can't seem to pry the headlight body out at all. It doesn't move at all. Are there more than one pin to remove? The manual only shows one. Any help here would be appreciated. Thanks.

I have a 2001 JGC, sounds like you are on the right track, there is one long bolt that holds the assemby in, this bolt is on top and center of the healight, the main thing is you have to litterally pry the assembly out, it took a lot my first time to get it out. Inside there are two or three plastic pins with a ball on the end, theese also snap into the vehilce, just keep prying but be careful.