im trying to hook up my oil pressure gauge and it says to hook the nylon pressure tubing to the appropriate pressure port on the engine block. does anyone know how i should hook this up or where to? thanks.

right next to your oil filter should be an oil pressure sensor. just buy a T-fitting and replace the sensor with it, then reinstall the pressure sensor on the end and the fitting into the side.

Honda's oil pressure sensors use a BST thread, so u may have to rethread the T fitting to fit.

Originally posted by Hondahottie
right next to your oil filter should be an oil pressure sensor. just buy a T-fitting and replace the sensor with it, then reinstall the pressure sensor on the end and the fitting into the side.

Honda's oil pressure sensors use a BST thread, so u may have to rethread the T fitting to fit.
and the oil pressure is indicated on that image
http://hybrid.honda-perf.org/tech/sohcvtec/coolant.gif
it's about the same for every Honda engine:bloated:

thanks for the help. also, where can i get a "T" fitting that i need? and does anyone know where i can get some real small nylon hose? thanks.