need help with my turning signals inside sometimes they just blink a lil bit and sometimes they dont work at all what do i gotta look for to fix that

well they have a defect

mine does the same thing

i have to hold mine between on and off to get them to work

the switch inside the steering column for the turn signal needs to be replaced

any idea on the cost of that

well it will have to be done by a mechanic...the tools that u need, not everybody has, prob around 100, mine was done free....by the place i bought it from

had the same thing happen on my z34...its your multi-function switch...i also found out that if your multi function switch is bad it will short out your brake lights when have ur foot on the break and try to use your turn signals

If your car has an air bag, it's a pain in the butt. If not, the only pain is running the wires back down the column.

Mine too. If I pull it towards me slightly as I am turning it on to signal it works fine. Afetr a while you get int he habit of turning them on that way and it is an unnoticable defect that should have been a recall by GM.

OMG is my tYpIng aWfUl...