My 88 B250 needs a 2nd Bench seat.
patrickd49
06-24-2004, 09:49 AM
Where is the best place to get one. I need the floor mounts also. Should I just go to a body shop & have them do the work or can I do it myself?
Where is the best place to order a replacement rug? Or should I try to cut my own from carpet scraps.
What is the best way to reglue the carpet that fits onto the inside rear wheel fender wells? They have completely fallen off.
I am right now in the process of replacing it's 318 with a 360. The old 318 has roller cams. The Rebuilt 360 also has roller cams. Does that mean the 318 may be a later engine than 1988? Were ther 318 w/ roller cams produced in 1988? Someone has told me NO. What gives??
Who knows the scoop on why the paint is slowly peeling off? I see it on other Dodge Vans about the same age. Is it the primer or the finish coat that is defective?
Where is the best place to order a replacement rug? Or should I try to cut my own from carpet scraps.
What is the best way to reglue the carpet that fits onto the inside rear wheel fender wells? They have completely fallen off.
I am right now in the process of replacing it's 318 with a 360. The old 318 has roller cams. The Rebuilt 360 also has roller cams. Does that mean the 318 may be a later engine than 1988? Were ther 318 w/ roller cams produced in 1988? Someone has told me NO. What gives??
Who knows the scoop on why the paint is slowly peeling off? I see it on other Dodge Vans about the same age. Is it the primer or the finish coat that is defective?
frankendart
09-13-2004, 07:25 PM
Roller cams were available on 318's since 1986.
NEver experienced paint peeling, but I have seen it. I think it has to do with the way the previous owner took care of the van.
NEver experienced paint peeling, but I have seen it. I think it has to do with the way the previous owner took care of the van.
Automotive Network, Inc., Copyright ©2024