2002 pk3 key

2002 montana owner manual says i need 2 original keys to programe the new key is there a way with just one key. how can you tell theres a chip on the key theres nothing stamp pk3 on it.bought at the dealer.

All Montana's I've done only require 1 key to program. I've heard of some in Canada require 2. What's the first digit in your vin #?

There's equipment out there that will Clone your key. Basically it copies the code from your original key and programs it onto a read/write chip in the duplicate key, and requires no on board programming. Most automotive locksmiths will have this equipment

http://www.hightechcarkeys.com

first few digit in vin #? 1gmduo3e12d i check with dealer said it was the right key cheeper version 49$ can

did you manage to program it with only one key?

no not yet. i checked with the dealer said it will take about haft hr to 1 hr to program at 60$ hr + tax i mention the programing should be included when you buy the key he just said yeah. still searching for a way.

My key is on the way from ebay. I bought it for 14.99 us. I will attempt to program it as directed in the manual (i only have one master key however and not the two that the Canadian vans need)

As soon as i get it and cut it, i will let you know how it goes.

I got my key today from mylocksmith on ebay. I got it cut at a hardware store, followed the programming instructions even though it is a Canadian van it worked.

I saved $80. Canadian.

Thought everyone should know

hi..when i bought my 2001 Montana last year I only got one key with it also.I had another key cut at the local dealers (cost $72.00) and programmed it myself.The owners manual tells you how to do it. I had to start my van with the Original key, then turn it off and insert the new key into the ignition within 7-10 seconds . I had to turn the key on without starting the vehicle.It works fine .I'm in Ontario,Canada and the dealer insisted I would need both keys to program a new one...I think its a money grab.The Owners manual gives instructions on how to program the key properly and says you can program up to 4 keys this way.