ok well i was wiring up some stuff today and found that hole in the firewall on passenger side. its liek that huge square grommet and has taht smaller square one inside. i got the smaller one out easily and then i found out that big one is impossible to get out and its huge. i found it when i crawled under my car.. its liek a giant boot and i cannot get it out. how did yall get it out or through it? is there any other hole in the firewall? cause i read on the clubGP modification area that this grommet is so easy to get out. thanks
ryan

bump.... thanks

There is a smaller gromet on the drivers side, just above the brake pedal.

like wehre the pedal goes through the wall?

Around that area.

Get a flashlight and crawl up under there. I ran all my wires for the gauges through the driver sde gromet

ok thanks ... yeah im only runnin a small 12 gagues wire so it should work. thanks ripn

um .. could u post a small of this hole in your car.... cause i cant find it in my car... thanks AIM me at FenderStrat814 if u want to send the pic there .. thks man

I passed all the cables and oil line for the oil PSI gages thru that small hole over the break pedal...

What year car?? We are talking 97+ right??

Take the 2 lower panels off. The one by your feet and the one by your knees. Shouldnt be too hard to see.

ok well i couldnt find it so i made a way through the one on the passanger side.. thanks tho man.

Man, if you take the panel under the steering wheel you would see the hole over the break pedal. Do not have to run all those cables behind the AC