Our Community is 940,000 Strong. Join Us.


98 JGC 5.2L Water Pump


Fondew
06-22-2004, 07:38 PM
I need to replace the water pump on my 98 grand cherokee. After taking a close look at it I notice that there is a metal tube coming directly out of it that feeds the heater core. There seems to be no fittings on this tube,its just a straight shot into the pump. I looked at a new pump at the parts store and it doesnt come with a tube already in it. before I tear it apart can anyone tell me how does this tube get removed and reinstalled. Is it pressed in or what? I'M BAFFLED!!!

Any info greatly appreciated!!

Thanks:
Rich

nick capage
06-25-2004, 11:36 AM
one bolt holds the tube to the water pump.then just pull it out,at the end of the tube is a o ring. replace it, put black rtv silocone on it and re install

dksob81
09-08-2004, 11:40 PM
that black tube get's mounted to the Drive Accessory Bracket with a bolt, and there is an O-ring atached to the end of it, I think a newO-ring comes with the Gasket for the water pump,, just put the new O-Ring on the tube and put a thin coat of clean engine oil on the O-Ring (it will help the O-ring slide inton the water pump), and push the tube into the water pump do not twist or turn it, u may break the O-Ring which will cause a leak. and make sure u put some RTV (BLUE) or (RED) on the block and the water pump and then put the gasket on and torque to spec (30 ft./lbs)

Add your comment to this topic!