Register and join the discussion

Anybody know how to take off a stubborn O2 Sensor!!!


stopher
06-07-2004, 01:09 AM
Does anyone know how to take off a stubborn O2 sensor that has rounded off edges? I can't start the car because I messed up the old O2 sensor. I tried a O2 sensor socket but that's what rounded off the edges. PLEASE SOMEONE HELP!!!

kicker1_solo
06-07-2004, 02:03 AM
Does anyone know how to take off a stubborn O2 sensor that has rounded off edges?
yes. thanks for asking

TheSilentChamber
06-07-2004, 04:41 AM
vice grips is your best bet. Get some stuff called PB Blaster, its a white can with a bunch of writiing on it and a yellow cap at parts stores. Let it soak for a few hours and it will probably come out with the vice grips.

boosted k20
06-07-2004, 03:47 PM
i took mine out by 1st spray n it with some WD-40. i used a 3/4 inch(i think thats the size, not too sure) open wrench and stuck a pipe on the end of it in order to get more torque action going. it came out with no problem. since u stripped the edges, ur gonna have probelms. only suggestion is to use a vice grip or maybe a monkey wrench and attach a pipe at the end of it so u have more leverage/torque. but the monkey wrench might strip it even more.

those O2 sensor sockets are a waste of time IMO. u can get the sensor off by using an open wrench.

xproductionz
06-07-2004, 06:43 PM
ur engine should still work even though the 02 sensor is not working

stopher
06-08-2004, 06:19 PM
Well, I finally got the car to start. Found out that the fuse for the ECU was blown. Now all I need to do is get the O2 sensor off.

stopher
06-08-2004, 09:33 PM
Well I finally got it off. Took forever because the thread was messed up on the O2 Sensor. I used vice grips, WD-40, and PB Blaster and heated up my engine to take it out. It took me forever though around 20-30 mins. Thanks for all your help.

Add your comment to this topic!