1997 Blazer intermittent key removal problem

Hi all, There is a new problem surfacing in the Blazer. It is 4WD, 4.3 auto with floor shift. Every few days, when shutting off the blazer, the ignition switch will not turn all the way to the lock position. The key can't be removed. So far, letting it set for 5 to 10 minutes & trying again works & the switch can be turned to the lock position. Any ideas where to look for problems?
Thanks, Bruce

same prob on my 97 broken wire in shift consol per service tech se my post search berniescout

Thanks, will check out this weekend

I have the same problem on my 97 blazer. If I turn the key to the "on" position and flip the thumb button on the shifter, I hear a click in the steering column. Then the key will turn off and come out. Someone said it may be the Park sensor on the shifter.

Hi all, There is a new problem surfacing in the Blazer. It is 4WD, 4.3 auto with floor shift. Every few days, when shutting off the blazer, the ignition switch will not turn all the way to the lock position. The key can't be removed. So far, letting it set for 5 to 10 minutes & trying again works & the switch can be turned to the lock position. Any ideas where to look for problems?
Thanks, Bruce

I have a nother problem I can remove my key all right,but when I install key and go to crank blazer there is no cluster lights coming on just the engine well turn over I can put a jumper from fuse 9 to fuse10 and the cluster lights well come on and it well start up done change ecm out on it,got any idea

welcome to af. this thread is now over 3 years old. please refrian from posting in threads over 6 months old. feel free to start a new thread in the problem diagnosis section.