Hello there everybody, i am new to this R/C thing, however today i went to a local hobby shop today and say the 1/10 Ferrai enzo TB-01, and i was absolutely STUNNED, i thought to my seld i HAAAAAAAAAAAAD to have this, but i came home to do some research first, and talk to my friend, he said he has TL-01 with the castrol supra for a body, now obviously i figured TB-01 would prbably give me the best results, but however TL-01 is a bit cheaper, am i going to bet similar results with the TL? i wanna learn to drift, after watching thoe SG videos, omfg, anyway similar results? not similer? any suggestions?? and price isnt the BIGGEST isuues but would like to keep it as low as possible. Thankz guys.

Hello. Welcome to the hobby. Any 4WD car could drift. You will get the similer results after alot of practice. It doesn't matter what one you get at least it is 4wd again and has adjustable suspension. I will look for some information on both and get back too you.

Hey man, thankz a lot for the help, ok so 4WD with adjustable suspension, got it, hmm i think that TB-01 Enzo i saw should do it, but i dont liek the enzo cover, ill get a diff one later, anything else i should look for?

Did you mean this car.

http://www.tamiyausa.com/product/rc/electric/110scale/tb01/58298.html

Seems to be a good car. I believe any 190mm body will fit it.

yup thats the exact one i saw, but its a bit expensive, my friend is offering to sell me this one? http://www.tamiyausa.com/product/rc/electric/110scale/tl01/58264.html
any thoughts? good/bad?

That is a TL-01 chassie. It is a good car for anything. Many people i know who drift use that car. So yeah it is a good car.

hmmmmmmmm ok, he says it doesnt have adjustable shox, u said i need that right? is there an upgrade or sumthing for it? hes selling me the body, chasis, Rc unit, battery, and charger, were still debating on price, but sumthing around $150 cad, am i gettin ripped off? or is it a good price?

Does it come with at MSC or an ESC speed controller. You don't really need adj shocks right away only adj things like camber to chang the angle of the wheel.

he says its a its a futaba mc230cr (whatever taht means lol) and a FET electronic controller

Good. Go for it. I don't know what 150canadin money is in us dollors though.

ya i think i will, then upgrade it like a bitch lol, hmmm so u think its a good deal?

Seems like a good deal. Only thing i don't know is the price in us $ . is the can $ higher then the us $

umm 150 cad is like 110 US give or take $5, hmm i think i will get it and tell u exactly what he did to it, then can u help me make it a niiiiiice drifter?

$110. I just did the math. Nice price for it too. Go for it.

alright cool, i will get it for sure, i think i might get him to lower the price a bit :D lol, now for the next question, is there a good site or sumthing where i can get extra bodies or say upgrade parts or stuff like that?

cuz iam seeing some of these are ppls here on the RCdrift website, those HAAAAAAAVE to me modded, so i wanna like do stuff to mine to make it look good

Check out www.towerhobbies.com for new parts and upgrades. And for bodies. check out the drift thread and the top of the page and go down a bit to were the bodies area are for drift bodies and were to get them.

k thankz a lot man, HUGE help, and u said almost any 190mm body will fit?

You have found out about rcdrift. Hope you like it there. Im a rc pimp here. d

nice nice pimp daddy lol, k iam gonna this from him ASAP and gonna upgrade, the on to the drifting!!

Sweet hope you have fun with it.

Hey man, ok just one more thing, basically for a decent starting drifter i need sumthing 4WD, shaft driven, with prefebably adjustable shocks and camber?

Yes.