No spare in the Ignition Control Module

Today the car starts by 2-3 seconds and engine dies. I checked the fuel pump and its ok but isn't spare on the Ignition Control Module. What can be, my car has 96k miles, its a 97 gtp.

The car doesn't start

correction...

spare = SPARK (IGNITION SPARK)

Fuel pump is priming??

Maybe its the fuel pump resistor http://rmcgp.clubgp.com/fpresistor.html

Yes the fuel pump is ok, the resistor is ok. I've checked. There is no spark in the ICM, that's the problem... what can be?

i try with the resistor jump to test and it's ok, the car doesn't start, there are pressure on the fuel lines. All fuel it's ok, but spark are bad, no spark on the wires...

The car is in the Mechanic Shop, they say, maybe is the crank shaft sensor broken, or something like that, but isn't have a OTC diagnostic yet. Is in progress right now...

Some suggestions, questions?

Solution :

ECM Fuse burned... 15A
Cost : $15c...

doohh!!!!

Sorry, was 10A of ECM Fuse

The questions is WHY??? =S