|
|
new enginesamandiar 05-17-2004, 02:10 AM I have a 1979 Ford Granada (see sig). The six I have in there is getting a little tired (184k mi), so I decided I would like to upgrade to a V8. A 302 sounds best right now, but a 351 will work as well. I am looking to get around 300hp out of the engine without using a supercharger. That shouldn't be a problem. Also, I want to take out the C4 auto and put in a 5spd manual floor stick. I hear tremec makes good trannys. Mainly, what I want to know is: How expensive will it be to attain 300hp and what mods are best for that? Can a n00b like me do an engine/tranny swap without a mechanic? Is it relatively easy to put a 5spd manual in a Granada? Thanks for the help! pre98zetec 05-17-2004, 10:10 AM How bout a 390? ModMech 05-17-2004, 11:09 AM A Granada is very similar to the Fairmont. They used the 255 V-8 in the Fairmont, so a 302 should fit just fine (afterall, the Fairmont is a "Fox" body as well as the Mustang). The most difficult part of this is assembling all the bits you'll need to fit everything togather, but anyone who can read a servivce manual, and follow directions *can* do this. It will not be a quick or easy project. samandiar 05-18-2004, 01:52 AM Damn. To answer Sk8ter, nobody can fit a 390 under the hood of a Granada, at least not anyone I know. I'm probably not going to end up doing a swap, because I'm a little short on cash and I don't want my only car to be out of commision for a long time. I'm just trying to get a feel for how much money and work it would require. pre98zetec 05-18-2004, 03:26 AM Sorry, I never knew the engine bay was so small in them :lol: Ignore what I said in my first post.. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|