ok i bought a freedom keyless entry & alarm but the instructions are not all that good at all i got the whole alarm in but my question is how do i hook the keyless entry up with the 2 relays this is in a 95 neon sport it came with one relay but the book says i need 2 and it doesnt explain which wire goes to which prong the relays anybody have any ideas?

Goto www.bulldogsecurity.com and check what it says for your car. I believe what it is talking about is the reverse polarity locks your car has. What happens is when you press the lock button, the lock wire goes 12v+ and the unlock wire goes to ground. When you press unlock, the wires reverse what I stated earilier. If you are not real familar with using relays, I do not suggest doing this but the diagram is on the link I provided.

im familiar with relays but this alarm just doesnt explain anything and no matter what i do the keyless entry doesnt work

im familiar with relays but this alarm just doesnt explain anything and no matter what i do the keyless entry doesnt work
Yeah, that's the problem with these fly-by-night cheapo alarms. The only thing I can tell you is that the alarm MUST have 2 wires that are to be used for lock/unlock. You have to find out if they are - or+ pulse. Then go from there.

here i scanned a pic of the page for the keyless entry install from the instructions maybe somebody else can explain it a little better
http://www.myimgs.com/data/bumpinneon/scan1.jpg

thread closed i got it all working