hey guys,
i'm trying to remove my stock radio in my 98 civic si, but its a total mind boggling job. me and my friends have all tried to get it out with out breaking anything..anyone got any advice or steps on how to remove it
thanks!

i just took mine out of my 2000 lx, so i dont know how much his will help you, but here's what i had to go through for mine. Remove glove box, remove bottom of driver's side dash, remove center console storage unit, remove center console containing shifter, remove drink holder and peice of paneling directly above it. These can all be remove via visible screws. Now that you have all this off you can finally see the screws holding in the radio/AC/hazard light fixture. There are four screws going straight up from underneath that hold in the radio harness (there might also be 2 screws going in from each side which you can now see since removing glove box and driver side under dash paneling). Once you've got these screws out the whole unit should pop right out, then it's just a matter of disconnecting wiring harnesses.

We had trouble getting a screw out and this whole process took us about 2 hours lol. Good luck!

Just go to www.installdr.com. Piece of cake. Did two of them.

that link is awesome!!!!.......im go home tonight and just it apart for the hell of it, lol. too bad they dont have a site like this for everything else like engine and stuff. i mean, i know of one

http://www.deepstaged.net/installs.htm

they are pretty good and have lots of pics.