2002 ranger hp tweak questions
Faze2183
04-21-2004, 04:38 AM
my sisters bf has a 2002 for ranger edge 4x4 with the V6 3.0 motor and 5 speed....
hes wantin to know what kinda mods can he do to get more power or well small power and etc.....
any thoughts or suguestions will help thanks
hes wantin to know what kinda mods can he do to get more power or well small power and etc.....
any thoughts or suguestions will help thanks
splashiod
04-21-2004, 11:27 AM
check here for easy mod suggestions http://groups.msn.com/RangerBill/newbies.msnw
2000mudder
04-21-2004, 11:34 AM
K&N air induction kit with new mass air flow sonsor,gibson exhaust,JET performance chip. thats about it. should get close to 200hp frm the stock 160hp
Faze2183
04-22-2004, 01:58 AM
how do u pull the air box out from the truck? i sat there tryin to pull that damm thing out for at least 30 mins in fear of crackin it :banghead:
TheRangerOfDanger
04-22-2004, 08:44 AM
there's lots to do
- MSD 6A ignition system. The ignition itself cost $149.95 and is part #MSD-6200 at Summitracing.com. - - get the 6AL if you want a built in rev limiter
- for even more spark, get the blaster 2 coil
- lots of new tech high power spark plugs
- high cca (cold cranking amp) battery (ie yellow top Optima)
- you can make your own exhaust, or there are several on the market (ie Gibson, Flowmaster etc) or from
http://www.macperformance.com/store/category.cfm?SID=3&Category_ID=516
- you can make your own intake with a cone filter and some piping, or buy one, from
http://www.macperformance.com/store/category.cfm?SID=3&Category_ID=515
- buy a new MAF, which will work with the computer
- JBA and Pacesetter both make headers
- Camcraft makes a hi-po cam for it
- Whipple makes a supercharger for the later models like the one he has with the 3.0 engine
- MSD 6A ignition system. The ignition itself cost $149.95 and is part #MSD-6200 at Summitracing.com. - - get the 6AL if you want a built in rev limiter
- for even more spark, get the blaster 2 coil
- lots of new tech high power spark plugs
- high cca (cold cranking amp) battery (ie yellow top Optima)
- you can make your own exhaust, or there are several on the market (ie Gibson, Flowmaster etc) or from
http://www.macperformance.com/store/category.cfm?SID=3&Category_ID=516
- you can make your own intake with a cone filter and some piping, or buy one, from
http://www.macperformance.com/store/category.cfm?SID=3&Category_ID=515
- buy a new MAF, which will work with the computer
- JBA and Pacesetter both make headers
- Camcraft makes a hi-po cam for it
- Whipple makes a supercharger for the later models like the one he has with the 3.0 engine
Automotive Network, Inc., Copyright ©2024