hey all....well you guys are some of the harshest critics out there....so, i wanted to get yer brutal honest opinions on my ride set-up....

i don't have the picts up yet of the b18c swap....but the exterior is "done for now"....however long that lasts....

any criticism, advice, things to buy and props appreciated.....mc

my ride:

http://www.cardomain.com/id/ekb18cjdmitr

well, you know where I stand on the tails. I don't like them, but they look alright. 1 thing you need to do is slam that bitch.

hey GS.....thanks again....

i was trying to look at the wheel wells last night to see how much of a drop it could take....i wanted to do about 1.5 inch all the way around....but the gap from tire to wheel well in back is under 2 inches....there's this lip on the interior of the well (right about the outside edge of the tire) that is so close to the tire already....

these are only 16" wheels on there....will it handle 1.5" drop? can you shave anything off of the interior of the wheel well to help with clearance?....as always, any help appreciated....peace...mc

any criticism, advice, things to buy and props appreciated.....mc
http://www.cardomain.com/id/ekb18cjdmitr

Keep it as stock looking as possible...a "SLEEPER". :2cents:

I like the way the black slipstreams look like on your car. :2cents:

Hmmm...I think I'll go black too...but with the silver lip one.

hey GS.....thanks again....

i was trying to look at the wheel wells last night to see how much of a drop it could take....i wanted to do about 1.5 inch all the way around....but the gap from tire to wheel well in back is under 2 inches....there's this lip on the interior of the well (right about the outside edge of the tire) that is so close to the tire already....

these are only 16" wheels on there....will it handle 1.5" drop? can you shave anything off of the interior of the wheel well to help with clearance?....as always, any help appreciated....peace...mc
a 1.5" drop is very conservative. Don't worry about any rubbing and just do it! :icon16: