Our Community is 940,000 Strong. Join Us.


Trans clutch line?


nxtnlin
04-11-2004, 10:21 PM
I'm tring to swap the 5-speed transmission in my 1992 Ranger. Can someone tell me how to get the hydraulic line that operates the clutch disconected?

whitelimo55
04-12-2004, 01:18 PM
should be similar to the 95 i just pulled. the line disconnects at the transmission. it separates like a fuel or a/c line. there is a plastic sleeve around the inside of the connector. push it all the way in with a fuel line disconnect tool and the fitting should pull out.

nxtnlin
04-12-2004, 01:49 PM
Thanks. I'm about to go back out to try again. I'll let you know . Have a good day.

nxtnlin
04-12-2004, 07:06 PM
There is a tiny little roll pin holding the line to the slave cylinder. I drove it out and the line was free. Thanks for your post.

Add your comment to this topic!