98 sonoma ignition trouble
rednahay
01-18-2004, 12:55 AM
I have a 98 sonoma 2.2L 5 speed. I am not getting fire to the plugs. I have a Haynes manual and have gone thru it's test steps and everything checks out. There is 12 v on the proper wire to the ignition module, both coils test good, and I have had the module it self tested. The only thing I can think of is some sort of inhibit signal on one of the other leads to the module, but I can't find a wireing diagram that shows these leads. Can anyone help me locate a wireing diagram or tell me something else to try.
Thanks guys, Rednehay
Thanks guys, Rednehay
ahopton
09-05-2004, 06:40 AM
Did you get any takers on this question. I have a diagram I can email you, from a site I subscribed to. Got the wiring diag but could'nt find the connector views for the Ignition Module. Even a color photograph of the connectors showing which wire is where would be helpful, as the wiring diagram gives some clues.
I will try and post the diagram as an image in my gallery. Look forward to any help you can give ...
Cheers.
I will try and post the diagram as an image in my gallery. Look forward to any help you can give ...
Cheers.
Automotive Network, Inc., Copyright ©2024