Hey People, Does anyone have tips, or experiance doing a tune up job on a s10 4 banger 2200? It looks troubling, and how bout a PCV install--EZ or tough? Thanks for your help.

I looked for two hours and cant find the pcv valve---HELP!

go to: Search this Forum, Top of this page on this Web Site... and put in: PCV + 4 cyl. (hit search)

I cant find the pcv valve also
ne1 know where it is?
1999 S-10 2.2

I still haven't found a pcv valve on my truck. Anyone know?

nope and good luck with plugs n wires

Most, PCV Valves are located on the valve cover. And are VERY easy to change. They slide right in and out. Try following your vaccume lines, one of them will lead to the pcv valve.

Apparently this forum is not designed for answering simple questions like, where is that PCV valve?

I've got a 94' 4.3L V6, My PCV valve is located on the Passenger side valve cover, dead center on the top of the valve cover. To change takes less than a minute.
But that's my truck, obivously a 00' 4 banger is a different engine, so I can't tell you for sure.
From what I've seen on other engines, it's always on/near the top of the engine.

Apparently this forum is not designed for answering simple questions like, where is that PCV valve?

it is right behind the "black box" that says 2200 that attaches to your TB. two clamps and one 10mm bolt hold it on... the pcv valve actuall connects its vacuum hose to the back side of this box

on the 2.2 if you have the flat valve cover with a hose hooked into the rear pointing to the driver side and on to the front pointing to the passenger side the one in the front is your pcv valve

it is right behind the "black box" that says 2200 that attaches to your TB. two clamps and one 10mm bolt hold it on... the pcv valve actuall connects its vacuum hose to the back side of this box
Thank you very much. I wasabout to give up and throw the valve away. Thanks for the quick response. This turned into a major mystery to the mechanics in my area. Terry1

if a mechanic doesn't know where that pcv is maybe you should sell the info to them. glad i could help you