I have a 93 toyota tercel. Im looking at new shift knobs and I was wondering how you remove the stock shift know to replace it. Thanks in advance.

Grab it and unscrew counter clock wise, it's just glued not to slip. Most aftermarket don't screw back on though.

Thanks for the post.. One question though.. When I unscrew the factory knob I should be able to put a different one on that I bought right.. By forcing the knob off it wont damage anything will it.. Thanks for everything..

Didn't damage anything on mine, most aftermarket ones just fit a shft without theads, meaning you'd have to cut it, just like I cut mine. :)

Thanks for the help... I got the old one off with a pair of pliers and I drilled some holes in the threads of the stick and then just put some screws through those to get it tight.. It fits good.. Thanks for the replies..