hi i got a quiksilver and wanna fit new wheels,

anyone got 16's on without any problmes and any wheela rch wokr needed.
If so what tyre size u got and have you lowered it.

I have had long discussions about this with people like Ecosse, but have had little help from them! However, I met a guy with a quiksilver who had done this, Dropped 35 mm all round, With 16's.

He had to do some minor work on the arches, (The plastic bit on the rear bumper needed to go) but apart from that it was fine. Skinnier tyres you can get the better, then work up a size at a time was also his suggestion.

If you need body work done tho, I would suggest R-Tec in St Albans who have done mine, I only have 16's, but decided it would be better. I get no scrubbage at all dropped 45 mm, he was getting a little.

Hope this helps

Hey,
New to thsi forum! i got a 2002 106 quiksilver other day and want to put 16" aloys on it and lower it about 40mm. Do u get any problems with rubbing? I see u said there is minor work to be done when fitting these aloys. When u say minor how minor mate and is it costly. Thanks

Help. I got a 2001 106 quiksilver and want 17s on it. Its not lowered will I get them on? Also what offset will I need?

If your not already a member go to www.quikpugclub.com there is lots of information about Quiksilvers and what wheels fit etc.... on the forum


Its the first Quiksilver owners site with over 180 members and an active forum. Join up!