Hello Everyone,

- Trying to "hardwire" my radar detector into my van but can't find an open/available "switched" power point on any of the inside fuse blocks.

- Any suggestions of where to wire the unit into so that when I turn the ignition off, so goes the radar detector?

Thanks,

Moose

What you need to do is get a test light and probe the fuse panel to find the terminals that are live. You should do this with the key in the ON position. As you find one ... turn the ignition OFF and if the test light goes off ... then you have found the terminal to use.

Wht.Blk off of the Ign Harness or Blk.Ylw same location.