-------------------------

The bulbs are manufactured by a company called Mercury and they are from Japan.

Mercury Xenon White are available in the following blub sizes:

HEADLIGHTS
9003 - 110w
9003 - 130w
9004 - 110w
9004 - 130w
9005 - 110w
9005 - 130w
9006 - 85w
9006 - 110w
9007 - 110w
9007 - 130w

H1 - 100w
H1 - 130w
H3 - 100w
H3 - 130w
H4 - 100w
H4 - 110w
H7 - 100w
H7 - 130w

$22.00 shipped per pair
order 5 pairs of and i'll sell em to you for $20.00 per pair..



OTHER LIGHTS
1156 (single filament) - 50w
1157 (dual filament) - 15w/50w

3157 (dual filament) - 15w/50w
7440 (like 3157 but no plastic piece) - 15w/50w

168 - (not sure on wattage)
194 - (not sure on wattage)

881 - 37.5w
898 - 37.5w


$20 shipped per pair




INTERIOR LIGHTS
3022 (10x31mm)
3175 (10x36mm)

interior lights: $10 each.

Payment can be sent via PayPal to Ry@altimas.net. If you'd like to purchase bulbs, please send me an email, Ry@altimas.net.

Hey do you have bulb #7440 is yellow? if not, can you list the colors available?

Thanks

damn dude 130W with the 9004's? Wouldnt that melt the wire harness right off? :)

Originally posted by wickedG20
Hey do you have bulb #7440 is yellow? if not, can you list the colors available?

Thanks

Just the hyper white...

Originally posted by A380Driver
damn dude 130W with the 9004's? Wouldnt that melt the wire harness right off? :)


That's our high watt application. :D

After doing some research, I've found out that the #1 reason for a melted harness was improper installation. If you do not PLUG the bulb in completely into the socket, water and elements squeeze in between the bulb and the socket, and soon thereafter they get fried. Even though you feel you have pushed the bulb all the way in the harness socket, you probably haven't.

You say upgraded...but im interested in if this melts the STOCK harness, as our bulbs are normally 45W

9004 - 130w

I am also interested in getting some bulbs but I am concerned that 130w will melt the harness.... Do you know of any one with a P10 that has used this bulb?

:confused: :confused: :confused:

I just orded a set of 130w for my P10..... With any luck I won't f-up the harness..


:devil: :devil:

Str8 what kinda front bumper is that? was it hard to modify , also how hard was it to get teh M3 skirts to fit? alota money??

so you guys sure that theses bulbs wouldnt melt the wire harness??

95_g20_p10

You can read about the details here.....

Details (http://www.automotiveforums.com/vbulletin/showthread.php?threadid=11369&perpage=15&pagenumber=3)

But, the front bumper is for a 90-93 accord "Big Mouth"
It took a little work to get it to fit. This side skirts are also for the accord, they are just M3 look alikes. I got them used for $115.

Originally posted by A380Driver
You say upgraded...but im interested in if this melts the STOCK harness, as our bulbs are normally 45W

errrr.. edit..

Originally posted by GtRider
so you guys sure that theses bulbs wouldnt melt the wire harness??

Over a year and counting.