|
|
DC sports Ceramic Coated headersIan90accord2dr 12-30-2000, 05:13 PM Does anyone know where i can get DC Sports Ceramic Coated headers at a god price for my 90 accord. I've seen online sites for group bying that had DC sports headers for $200, but only for civics and integras. ---------- 90 accord 2dr 16" enkie RF1's VTEC V6 01-01-2001, 07:23 PM the groupbuycenter.com is always a good place but it looks like you have already tried there some other sites are: autodynamic.com autocarparts.com autotoys.com aieonline.com ---------- 00 accord coupe ex v6 SS aem cai, WW 3-piece, clears enzo@af 01-03-2001, 04:44 AM nopi.com may have some. I wouldn't recommend getting ceramic coating. I've heard it tends to crack and fall off if it's not done well and thermalwrap will offer the same benefits at a big saving. Good luck. ---------- "Ferrari isn't a car, it's a lifestyle" -Enzo Ferrari. VTEC V6 01-03-2001, 10:11 PM most header manufacturers dont reccomend putting on thermal wraps because it heats up the pipe alot and sometimes causes cracking and the header wont last as long due to the extreme heat. The best way to make your headers last a long time and make them look good at the same time is to have them jet hot coated. they have some pics and more details on the SHO accord V6 board if you do a search. ---------- 00 Honda Accord coupe EX V6 SS aem cai, WW 3-piece midwing, clears omar 02-12-2001, 12:57 PM . Verse914 09-15-2001, 12:49 AM Ive had my DC ceramic header for a long time with no problems. I had some header wrap on it, and it got way too hot. After 1 week I took it off. grapeape97 12-11-2001, 08:12 PM I have the dc headers on my 97 accord nno problems except the stupid check engine light keeps coming on. EliteAccordPH 12-11-2001, 11:05 PM Originally posted by VTEC V6 most header manufacturers dont reccomend putting on thermal wraps because it heats up the pipe alot and sometimes causes cracking and the header wont last as long due to the extreme heat. The best way to make your headers last a long time and make them look good at the same time is to have them jet hot coated. they have some pics and more details on the SHO accord V6 board if you do a search. ---------- 00 Honda Accord coupe EX V6 SS aem cai, WW 3-piece midwing, clears Not only that it can cause damage or melt your cat due to extreme heat. Dahmin8 12-19-2001, 11:45 PM I don't know if DC sport ceramic header is the best bet yet. I'm still considering it though. I'm also looking into Neuspeed new header for 90 Accords and Chikara also makes one for it. Two bills dosen't seem like a bad price and I hear alot of people like the DC header. I'll be watching your thread to see what turns up. :p drift 12-20-2001, 05:32 PM i've got the Neuspeed for my 94 EX... hasnt rusted in over a year now. and thermal wrap will not cause your cat to melt. platinum and rhodium are much more durable than that, plus since the header aint melting, why should the cat housing? :rolleyes: dominate9 12-31-2001, 05:23 PM Originally posted by grapeape97 I have the dc headers on my 97 accord nno problems except the stupid check engine light keeps coming on. I have a 97 EX and I was thinking about putting DC Sports Ceramic Headers on my car too. Have you figured out the reason why your check engine light keeps coming on? EliteAccordPH 12-31-2001, 07:22 PM Originally posted by drift i've got the Neuspeed for my 94 EX... hasnt rusted in over a year now. and thermal wrap will not cause your cat to melt. platinum and rhodium are much more durable than that, plus since the header aint melting, why should the cat housing? :rolleyes: Thermal wrap everything, and get a turbo. I'm sure something is going to get hot:finger: SpoilerV2 12-31-2001, 11:43 PM Originally posted by grapeape97 I have the dc headers on my 97 accord nno problems except the stupid check engine light keeps coming on. sounds like your o2 sensor is loose.. well at least the connections to it. That happened to me a year ago.. just push it back in. ACR97 01-04-2002, 01:39 PM I WANT TO GET NITRIOUS, BUT SOME ONE TOLD ME YOU CANT USE NOS ON CERAMIC HEADERS. DOES ANY ONE KNOW HOW TRUE THIS IS? IM GOING WITH A 75SHOT JasonAccord98LX 01-04-2002, 08:46 PM I just plain wouldnt fuck with nitrous on a motor that has stock internals. If you absolutely have to, I wouldnt use any more than a 50 shot. NOS doesnt do good things for the longevity of your internally stock engine. drift 01-05-2002, 03:28 AM Originally posted by ACR97 I WANT TO GET NITRIOUS, BUT SOME ONE TOLD ME YOU CANT USE NOS ON CERAMIC HEADERS. DOES ANY ONE KNOW HOW TRUE THIS IS? IM GOING WITH A 75SHOT that's BS. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|