hello all,

have a question about the probe. in the latest probe gt released what is the hp, torque, top speed, and 0-60 time for both stock, and modified probes?

thanks!:icon16:

Stock:
164 HP
154 lb/ft torque
top speed I believe 132 or 134
not sure bout the 0-60 sorry.

As far as modified ones it all depends on what kind of modifications they have

Dan

the 0-60 was 7.2-7.4 something in that area, the older probe gt's seemed to come with turbos but the newer ones didn't really seem to have them...everything else he said was right

thanks guys

are all probe gt 4 bangers? is it possible to get them over 200 for hp and torque?:bigthumb:

all 93+ pgt's are 6 cylinders. I'd say with new headers, exhaust, cai, and a couple other little mods you could come pretty close to 200 hp. Adding a turbo you can probably get around 250 without risking too much reliability.

To get 200hp and torque you would need new cams, CAI, catback, ZE intake manifold, headers wouldn't hurt, but they don't add that much, finally a lightened flywheel from an MX3 V6 will free up some HP(mx3 FW 16# KLDE FW 22#).

To get instant 200HP get a KLZE, about $1200 shipped. They have different heads, intake manifold, cams and a higher 10:1 CR. they are rated at 200hp, and are a direct drop in.

be careful though, they are junk yard engines, and should be treated as such. I rebuilt mine and presently have 35K on it. Still runs great.

where are some places i can get cams and other performance after market parts. i've done all the bolt ons, its time for heads, cams, upper/lower intake, etc..

hook me up with some options..thanks

Brian

the best place for probe related questions would be www.probetalk.com its THE probe community.

Stock:
164 HP
154 lb/ft torque
top speed I believe 132 or 134
not sure bout the 0-60 sorry.

As far as modified ones it all depends on what kind of modifications they have

Dan

allow me to ellaborate on dans statement. the 93/94's had 154lb/ft torque, but the 95-97's had 160...

allow me to ellaborate on dans statement. the 93/94's had 154lb/ft torque, but the 95-97's had 160...


so thats why it is rated at .6 seconds faster in the 1/4..... hmmm solves that riddle time to sell my 93 and get a 95