ABS, SVS, Trac off lights - 00 GA GT

I took it to a shop and they scanned it and told me RF speed sensor. I replaced RF wheel bearing with a new one (TIMKIN). Lights came on again so I put the bearing I took out of the RF on the LF. Lights came on again so I bought another new bearing for the LF and installed and STILL all 3 lights coming on. Now what?

have you resetted the code after the replacement? Are you sure that the wiring is not damaged? Are you sure it got installed proprelly?

Sounds like a broken sensor harness at the RF sensor.

If the code didn't got ereased AFTER the replacement the light will not turn off.

If it got erased, then have the code scanned. it could be a damaged wiring or oxidation at the connector or the EBCM (abs module).

Turned out to be a broken wire to RF.