Can anyone tell me how to program a new keyless entry remote. Thanks:confused:

You need to have the dealer do that.

If you look in your manual there are instructions how to do it they are very accurate. I programmed 2 remotes in less then 3 min. If you do not have your manual or need me to look up those directions for you let me know. I don't have my truck here right now but I can get that info to you tomorrow.

I bought a Durango that had RKE from the factory but the lot I bought it from did not have the orignal remote. I ordered one and got it but now need to program it. The dealer wants what I consider too much money to do this. Can anyone tell me how it is done?

How do you tell if a durango is equiped with keyless entry? The deal I bought mine from did not have any remotes and was not sure if it was equiped.

hi could you please send me the info on programming my keyless entry on my durango
it would be greatly appreciated
thank you
nathan

Nathan,

Did you ever get this information?
I need my remote programmed as well

I need the program for my remote I bought off of
ebay or maybe it,s the code i need if u can help
me i thank u very much

You do need at least 1 WORKING remote to program others to the Durango (at least for 99+ models.)

If you don't have at least 1 WORKING remote, you will need to make a stop at a local Chrysler/Dodge/Jeep dealership and have them use the DRB scantool to enter programming mode and add the remotes.