Our Community is 940,000 Strong. Join Us.

98 sts shifting


96DEVILLE
10-31-2010, 05:39 PM
1998 seville sts.. I had to remove the gear shift linkage off the trans. To do some work. I removed the gear shift switch too.how it is back together and i can t get any forwerd gears. When i put the shifter in gear ,d 1,2,or 3 the car stalles out. It does go in revers smoothly and drives nice backwards... Thank you 4 your help...carl
maxwedge
10-31-2010, 06:29 PM
Sounds like the range sensor on the trans is out of adjustment or in wrong and the pcm cannot see the proper selection and the unit is in reverse and drive at the same time, maybe.
96DEVILLE
11-01-2010, 04:21 PM
were is range seneor located ???
maxwedge
11-01-2010, 06:32 PM
On the top of the trans where the linkage connects.
96DEVILLE
11-08-2010, 10:53 PM
on the top of the trans where the linkage connects.
thanks car driving great .....thank you for your help.... Carl

Add your comment to this topic!