ABS and Traction Control Lights on after Jump start

Jump started my '99 Seville SLS from under the hood. Let some factory installed smoke out from near the coils. Now I have some lights on the dash, ABS and Traction Control & two messages, Service Stability Sys & Service Steering Sys. Brake pedal seems a bit stiff and steering is a bit stiff. White smoke from exhaust when first started, but seems to drive okay. Any suggestions?
Thanks!
Jerry

You need a full scan to access the bcm anti lock/steering codes.

I used my friends ODBII scanner and did not get any codes.

A regular obd11 scanner will not access abs codes, you need a high line scanner such as Snap- On, MT or MTG 2500.

Okay, Thanks!

Dealer replaced EBC (Electronic Brake Control) Module.
Problem Fixed.
Thread is now dead.