Our Community is 940,000 Strong. Join Us.


2000 Pontiac SSEi Oil Pressure Gauge Problem


pint4
04-18-2010, 03:42 AM
The oil presure gauge on my 2000 Pontiac SSEi is maxed out at 80 psi and stays there. Car runs ok. Is it possible the sending unit is bad? If so, does the needle default to zero or max? Has anyone had their oil pressure sending unit go bad?
Thanks,
Bob

jdq
04-18-2010, 11:16 AM
This is common , it pegs out to max, replace oil sender and itll be ok.

pint4
04-18-2010, 11:25 AM
Thanks, I will go out and buy one today. Hopefully the sending unit is in a location I can reach without taking apart everything.
Bob

Jrs3800
04-21-2010, 07:40 PM
The sending unit will be above the oil filter housing( on top usually ) and will be locate behind the area of the PS pump

pint4
04-26-2010, 12:21 AM
A huge thanks to everyone for the help. I replaced it and everyting is working again. Now if I can olny figure out why my "brakes", "Trac Off" and "Anti-Lock" lights are all lit up. I replaced my rear brakes which were bad but the lights are still on. The dash is lit up like a Christmas tree.
Thanks,
Bob

tempfixit
04-26-2010, 08:20 AM
FOr your lights being on, look for a broken wire on the front abs wires. that is where i found the problem on a 02 buick.

Add your comment to this topic!